Water Oto Chlorine Test Color Chart

Water Oto Chlorine Test Color Chart – Testing pool water is a simple process. Pool test kits will help you keep your pool looking clean, sparkling, and inviting day after day. Cap the test cell and invert to mix. Rinse the chlorine test cell with pool water.

Add five drops of solution 2, a phenol red indicator, and mix by gently swirling. Such errors not only foul up sanitation tests, but also make it. Compare the color with the ph color standards on the plastic tester to determine the ph level of your pool water. An overdose of chlorine or bromine can produce readings that are at times wildly off the charts.

Water Oto Chlorine Test Color Chart

To perform an oto test, five drops of the reagent are added to the water sample in the comparator (sample) tube and a color comparison is made to the color samples. Air shipment of oto solution and kits containing oto solution is prohibited. Ph, free available chlorine (fac), total alkalinity (ta), and acid demand.

3 place cap on vial and invert several times to mix. Simply use the hth® 4 in 1 test kit to measure: Blue lines will appear on strip.take the strip out of the vial and read the results:

Yellow color is produced and matched against charts within 10 sec, this gives the amount of ‘free chlorine ’ the yellow color appearing after a few minutes, gives the amount of. Fill the chlorine test cell with pool water to the mark. The other, less common, test is the oto, which works on the.

To test for total chlorine, add the specified amount of oto to the sample of water in the test cell. It can test for chlorine levels from 0.5 ppm to 5 ppm. Fill small test vial to line with pool water.

How to Use a Pool Test Kit to Check Water Quality